MIG 400(W2)
Features:
· 2 welding modes: MIG/MAG or MMA
· Classical knob control design; LED digital display
· Spatter control: improve stability of welding process
· Crater Amperage and crater Voltage control: improve crater effect when arc extinguishes
· Burn back control: eliminate metal globule in the end of wire at the final stage of welding process, good for arc strike in the next time welding process
· Tool box or water tank are selective, installed at the bottom
· Other basic function:
o Instant arc ignition
o Stepless adjustment of parameters
Technical parameters | MIG 400(W) |
Input voltage | 3phase 380v ±15% |
Frequency | 50/60Hz |
Input current | 22A |
Input power | 14kVA |
No-load voltage | 58A |
Rated duty cycle (40℃) | 60% |
Welding current | 30-400A |
Welding voltage | 10-40V |
Crater current | 30-400A |
Crater voltage | 10-40V |
Wire diameter) | 0.8/1.0/1.2mm |
Available wire type | Solid / Flux-cored |
Adjust mode | Manual setting |
Welding thickness | 2-30mm |
Protection class | IP23S |
Insulation grade | F |
Dimensions | 1000*420*1390mm |
Net weight | 78kg |