Delta MIG 500PRO
Features:
* Wide Range Metals Weldable
Stainless Steel, Carbon Steel, Aluminum and Al. Alloy, etc.
* Parameters Store and Read Function
99 Sets Weld Paramters Can be Stored and Read
* High Welding Speed
Maximum Wire Feeding Speed: 22 meters/minute
* Extremely Few Spatters During Weding
* Energy Saving
Cooling Fan Stops Automatically If without Operation Over 10 Minutes
* Can conncet to Robot
| Technical parameters | MIG 400D(W) |
| Input voltage(V) | 3phase 380v ±15% |
| Frequency(Hz) | 50/60 |
| Input current(A) | 22 |
| Input power(KVA) | 14 |
| No-load voltage(A) | 58 |
| Rated duty cycle （40℃） | 60% |
| Welding current(A) | 30-400 |
| Welding voltage(V) | 10-40 |
| Crater current(A) | 30-500 |
| Crater voltage(V) | 10-40 |
| Wire diameter(mm) | 0.8/1.0/1.2 |
| Available wire type | Solid / Flux-cored |
| Adjust mode | Manual setting/Synergic |
| Welding thickness(mm) | 2-30 |
| Gas Pre-flow time (s) | 0-1 |
| Gas Post-flow time (s) | 0-99.9 |
| Protection class | IP23S |
| Insulation grade | F |
| Dimension(mm) | 1000*420*1390 |
| Net weight(KG) | 78 |
